FREE SHIPPING! On orders of $100 * Some Exceptions Apply *
3 1/8” overall length with a 1” threaded length. The bolt threading is #8-32NC and is zinc plated steel. The pulley is made of zinc with a maximum halyard diameter of 3/16”. Hex nut, washer, and lock washer are all included.
This product is 4 1/8” overall in length with a 2 3/8” threaded length. The bolt threading is 5/16”-18NC and is stainless steel. The pulley is made of nylon with a maximum halyard diameter of 5/16”. Hex nut, washer, and lock washer are all included.
**Special Website Pricing**
Cast aluminum construction designed to slip over the top of the flagpole and be secured with three 1/4"-20NC stainless steel set screws. The top of the cap is designed to accept an ornament with a spindle threading of 1/2"-13NC.
This series truck is cast aluminum, constructed with pulley 1 1/2” outside diameter on the 2”, 2 3/8”, 2 1/2", and 3 1/2” models; 2” outside diameter on the 2 3/4”, 3”, and 3 1/4” models. All on a 1/4” stainless steel axle. Designed to slip over the top of the flagpole and be secured by stainless steel set screws (one 1/4”-20NC on the 2” diameter model; three 5/16”-18NC on the all other models). The top is designed to accept an ornament with a spindle threading of 1/2”-13NC. The ornament is secured to the truck with a size 10-32 stainless steel pan head screw. The maximum halyard diameter for this pulley is 5/16”.
This series truck is cast aluminum, constructed with a 1" outside diameter nylon pulley on a 3/16" stainless steel axle. Designed to slip over the top of the flagpole and be secured by one 1/4"-20NC stainless steel set screw. The top is designed to accept an ornament with a spindle threading of 1/2"-13NC. The ornament is secured to the truck with a size 10-32 stainless steel pin head screw. The maximum halyard diameter for this truck is 1/4".
Cast aluminum construction with a 1-7/16” outside diameter cast nylon pulley on a 1/4" stainless steel axle. Attaches with two 1/4"-20NC stainless steel flat head screws or two stainless steel straps (screws and/or straps not included). The maximum halyard diameter is 5/16”. Not supplied as standard with holes drilled for mounting.
This adapter is used for mounting a truck that has a spindle threading of 1 1/4" NPT and the pole does not have a threaded top plug installed. The adapter is tapped 1 1/4" NPT and is designed to slip over the top of the pole and is secured by three 1/4"-20NC stainless steel set screws.
This series truck is cast aluminum, constructed with a 1 1/2" outside diameter cast nylon pulley on a 1/4" stainless steel axles. Designed to slip over the top of the flagpole and be secured with three 5/16"-18NC stainless steel set screws. The top is designed to accept an ornament with a spindle threading of 1/2"-13NC. The ornament is secured to the truck with a 1/4"-20NC stainless set screw. The maximum halyard diameter for these pulleys is 5/16".
This truck is cast aluminum, constructed for use on rope style internal halyard flagpoles. A small pulley assembly is added to the inside of a standard outrigger style truck to allow the halyard to feed from inside the flagpole. The internal pulley assembly has a 1 1/2” outside diameter cast nylon pulley and the external pulley assembly has a 1 1/2” outside diameter cast nylon pulley for the 3 1/2" truck and 2" outside diameter cast nylon pully for the 3" truck. All are on a 1/4" stainless steel axle and is designed to slip over the top of the flagpole and be secured with three 5/16”-18NC stainless steel set screws. The top of the truck will accept an ornament with 1/2”-13NC threading. The ornament is held in place by a size 10-32 stainless steel pan head screw. The maximum halyard diameter for this pulley is 5/16”.
This series truck is cast aluminum, constructed with a 1 1/2” outside diameter cast nylon pulley on a 1/4” stainless steel axle. This truck is designed to be used on flagpoles that have up to a 3 1/2” outside top diameter with female fitting installed. The bottom of the spindle has a 1 1/4” NPT threading and is screwed into the top of the flagpole while the top spindle is designed to accept an ornament with a spindle threading of 1/2”-13NC. The ornament is secured to the truck with a 1/4”-20NC stainless steel set screw. For ease of rotation, product life and strength, these trucks utilize self-lubricating ball bearing assemblies. The maximum halyard size for this pulley is 5/16”.
This series truck is cast aluminum, constructed with a 1 15/16” outside diameter cast nylon pulley on a 1/4” stainless steel axle. This truck is designed to be used on flagpoles that have up to a 3 1/2” outside top diameter with female fitting installed. The bottom of the spindle has a 1 1/4” NPT threading and is screwed into the top of the flagpole while the top spindle is designed to accept an ornament with a spindle threading of 1/2”-13NC. The ornament is secured to the truck with a 1/4”-20NC stainless steel set screw. For ease of rotation, product life and strength, these trucks utilize self-lubricating ball bearing assemblies. The maximum halyard size for this pulley is 5/16”.
This truck is cast aluminum, constructed for use on rope style internal halyard flagpoles. A small pulley assembly is affixed to the inside of the trick housing to allow the halyard to feed from inside the flagpole. The pulley assembly has a 2” outside diameter case nylon pulley on a 1/4" stainless steel axle. This truck is designed to be used on flagpoles that have up to a 3 1/2" outside top diameter with female fitting installed. The bottom of the spindle has a 1 1/4” NPT threading and is screwed into the top of the flagpole. The top of the truck will accept an ornament with 1/2"-13NC threading. The ornament is secured to the truck with a 1/4"-20NC stainless steel set screw. The maximum halyard diameter for this pulley is 5/16”.
This series truck is cast aluminum, constructed with a 1 1/2” outside diameter cast nylon pulley on a 1/4” stainless steel axle. The bottom portion of the spindle is designed to fit over the top of the flagpole and is secured with three stainless steel set screws (1/4”-20NC on the 1 3/8” and 2” models & 5/16”-18NC on the 2 3/8” diameter model). The top is designed to accept an ornament with a spindle threading of 1/2”-13NC. The ornament is secured to the truck with a 1/4”-20NC stainless steel set screw. For ease of rotation, product life and strength, these trucks utilize self-lubricating ball bearing assemblies. The maximum halyard diameter for this pulley is 5/16”.
This truck is molded fiberglass, constructed with 1 1/2” outside diameter nylon pulleys on 1/4" stainless steel axles. Designed to slip into a 3" outside diameter pole top. The truck is hel in place by drilling thru the pole and securing the truck to the pole with screws and locktite. The top of the truck is designed to accept an ornament with a spindle threading of 1/2"-13NC. The maximum halyard diameter for these pulleys is 5/16”.
This series truck is cast aluminum, constructed with a 1 15/16” outside diameter cast nylon pulley on 3/8” stainless steel axles. This truck is designed to be used on flagpoles that have up to a 4” outside top diameter with female fitting installed. The bottom of the spindle has a 1 1/2” NPT threading and is screwed into the top of the flagpole while the top spindle is designed to accept an ornament with a spindle threading of 1/2"-13NC. The ornament is secured to the truck with a 1/4”-20NC stainless steel set screw. The truck body rotates on 26 stainless steel ball bearings on cast races. The maximum halyard diameter for these pulleys is 5/16”.
This series truck is cast aluminum, constructed with a 2 1/2” outside diameter aluminum pulley on 1/2” stainless steel axles. This truck is designed to be used on flagpoles that have up to a 5 1/2” outside top diameter with female fitting installed. The bottom of the spindle has a 1 1/4” NPT threading and is screwed into the top of the flagpole while the top spindle is designed to accept an ornament with a spindle threading of 1/2”-13NC. The ornament is secured to the truck with a 1/4”-20NC stainless steel set screw. The truck body rotates on 26 stainless steel ball bearings on cast races. The maximum halyard diameter for this pulley is 3/8”.
This series truck is cast aluminum, constructed with a 3 3/4” outside diameter aluminum pulley on 1/2” stainless steel axles. This truck is designed to be used on flagpoles that have up to a 5 1/2” outside top diameter with female fitting installed. The bottom of the spindle has a 1 1/4” NPT threading and is screwed into the top of the flagpole while the top spindle is designed to accept an ornament with a spindle threading of 1/2”-13NC. The ornament is secured to the truck with a 1/4”-20NC stainless steel set screw. The truck body rotates on 26 stainless steel ball bearings on cast races. The maximum halyard diameter for this pulley is 3/8”.
This truck is cast aluminum with a 1 1/4” NPT threaded spindle which screws into the top of the flagpole where a female fitting has been installed. The top of all trucks are designed to accept an ornament with a spindle threading of 1/2"-13NC. The ornament is secured to the truck with a 1/4"-20NC stainless steel set screw. The extra large model has stainless steel ball bearings in both upper & lower bearing races. All sizes are supplied with a stainless steel bushing at the cable exit point except the 3” diameter model which has a bronze fitting.
This series truck is cast aluminum, constructed with a 3 7/8” outside diameter aluminum pulleys on 1/2” stainless steel axles. This truck is designed to be used on flagpoles that have up to a 12 3/4” outside top diameter with female fitting installed. The bottom of the spindle has a 1 1/4” NPT threading and is screwed into the top of the flagpole while the top spindle is designed to accept an ornament with a spindle threading of 1/2”-13NC. The ornament is secured to the truck with a 1/4"-20NC stainless steel set screw. For ease of rotation, product life and strength, these trucks utilize stainless steel sealed lubricant ball bearing assemblies. The maximum halyard diameter for these pulleys is 3/8”.